Prodigy offers Protocol Exerciser & Protocol analyzers, which enables the hardware design engineer to test their designs. Supported protocols includes I3C, eMM, SPMI, 100BASE-T1 Automotive Ethernet, I2C/SPI, RFFE and more
I3C Protocol Analyzer and Exerciser
PGY-I3C-EX-PD is the leading instrument that enables the design and test engineers to test the I3C designs for its specifications by configuring PGY-I3C-EX-ED as master/slave, generating I3C traffic with error injection capability and decoding I3C Protocol decode packets.
100BASE-T1 Automotive Ethernet Protocol Analyzer
This Protocol Analyzer with multiple features to capture and debug communication between host and design under test. This is a Two-wire full duplex 100BASE-T1 PAM 3 signaling solutions.
I2C/SPI Exerciser and Protocol Analyzer
This Protocol Analyzer includes multiple features to capture and debug communication between host and design under test. It can be configuring as Master/Slave, generating I2C/SPI traffic and decoding the I2C/SPI protocol decode packets.
UFS Protocol Analyzer and Exerciser
This Protocol Analyzer captures and debugs communication across MPHY, UniPro and UFS protocol layers. It allows for instantaneous decoding of UFS layer, UniPro layer and MPHY layer with flexibility to correlate decoded data across these protocol layers.
SD, SDIO, eMMC Protocol Analyzer and Exerciser
This analyzer supports SD, SDIO and eMMC for data rates up to 200MHz (HS400) DDR mode. SD, SDIO and eMMC Protocol Analyzer is industry’s first eMMC protocol analyzer that supports version 4.41, 4.51, 5.0 and 5.1 specifications.
RFFE Protocol Analyzer and Exerciser
The RF Front-end control interface (RFFE) Serial bus interface supports variety of front end devices such as Power Amplifiers (PA), Low-Nose Amplifiers (LNA), filters, switches, power management modules, antenna tuners. It is widely used in mobile devices.